|
CA-5200 - POWER AMPLIFIER
 |
| click image to enlarge view |
The CA-5200 is a 5 x 200W model, based on the same channels used in the CA-2200. Power supply components are large enough to allow for the greater power demands of five channels without sacrificing performance. Design features include balanced circuitry, overbuilt power supplies and oversized output stages to ensure the highest performance at every output level, with any loudspeaker.
models
(balanced inputs) |
CA-5200 |
| voltage gain |
29.1dB |
bandwidth
phase
|
155kHz (-3dB)
22kHz (-0.1dB)
< -10° (22kHz) |
| sensitivity |
1.4Vrms |
power/channel (continuous)
(120VAC line, 1kHz signal regulated to 1% THD + noise into resistive load,
all channels driven) |
| load (resistive) |
|
| 8Ω |
200W |
| 4Ω |
370W |
| THD + noise (unweighted, 10Hz - 500kHz bandwidth, 1Vrms/1kHz input) |
| load (resistive) |
|
| none |
0.002% |
| 8Ω |
0.003% |
| 4Ω |
0.005% |
| noise |
FFT noise floor peaks all below –95dBV
(with terminated inputs) |
| S/N ratio (relative to 1kHz sine wave full level output into 8Ω) |
108dB |
height |
depth
(excluding
connectors) |
width |
gross
weight |
net
weight |
| 8.75” (222 mm) |
21.0” (534 mm) |
17.5” (445 mm) |
133 lbs (60 kg) |
121 lbs (55 kg) |
| idle power consumption |
348W |
| rated power consumption |
1056W |
|
ABOUT CLASSE