INTEGRATED/PREAMPLIFIER SPECIFICATIONS   model CAP-2100 frequency response distortion (THD + noise) 20Hz - 20kHz ± 0.1dB 0.005% (1Vrms balanced input) analog section   sensitivity 1.0Vrms (balanced input, volume 86) S/N ratio channel separation >90dB >95dB inputs   single-ended inputs single-ended tape inputs balanced inputs 3pr RCA (incl. 1pr w/phono option) / 100kÙ 1pr RCA / 100kÙ 1pr XLR / 200kÙ outputs   speaker single-ended (preamp out) balanced tape out 2pr 1pr RCA none 1pr RCA power consumption   rated power consumption idle 260W TBA weights & measurements   width depth height gross weight net weight 17.5” (445 mm) 16.5” (419 mm) (excluding connectors) 4.75” (121 mm) 59 lbs (27 kg) 50 lbs (23 kg) model CP-500 frequency response distortion (THD + noise) 20Hz - 200kHz ± 0.1dB 0.003% analog section   single-ended input (max level) single-ended output (max level) balanced input (max level) balanced output (max level) S/N ratio channel separation 5V 10V 10Vrms 20Vrms 110dB (max level to noise .oor) >110dB inputs   single-ended inputs (no./impedance) single-ended tape inputs (no./impedance) balanced inputs (no./impedance) 3pr RCA (incl. 1 pr w/phono option) / 100kO 1pr RCA / 100kO 2pr XLR / 200kO outputs   single-ended balanced tape out 1pr RCA 1pr XLR 1pr RCA weights & measurements   width depth height gross weight net weight 17.5” (445 mm) 16.5” (419 mm) (excluding connectors) 4.75” (121 mm) 33 lbs (15 kg) 26 lbs (12 kg) Go Back  |  Print this spec  |  Close Window