CA-5100 - POWER AMPLIFIER   
click image to enlarge view

The CA-5100 is a 5 x 100W model, based on the circuit topologies developed for the CA-5200 and other Delta series amplifiers. One large toroidal transformer with three secondary windings provides power supplies for left front and rear, right front and rear, and center channel audio circuits. Features including balanced and single-ended inputs, control and protection circuits are common to those on other Delta series amplifiers.

Click here to download CA-5100 brochure.

Model CA-5100
Power output
(all channels driven)
Frequency Response

100W/ch continuous rms @ 8Ω
190W/ch continuous rms @ 4Ω
10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)
Phase
Signal-to-noise ratio
Channel separation		 better than -10° @ 22kHz
105dB
better than 80dB @ 20kHz
Noise Floor (FFT)

Distortion

all peaks less than -95dBV
(10Hz – 80kHz)
0.003% @ 8Ω
(unweighted, 0.8Vrms/1kHz input, 10Hz – 500kHz)

Voltage Gain
Sensitivity
Input Impedance
Rated Power Consumption
Idle Power Consumption
Mains Voltage

29.1dB
1.0Vrms for rated output @ 8Ω
100kΩ
575w
204W
specified on rear panel

weights & measurements  
Width
Height
Depth
Shipping weight
net weight		 17.5” (445mm)
6.75” (171mm)
18.5” (470mm)
88 lbs (40kg)
75 lbs (34kg)

Classé reserve the right to adjust specifications without notice.
Compare specs  |  Print this spec  |  Close Window