CA-2100 - POWER AMPLIFIER   
click image to enlarge view
The stereo amplifier, CA-2100 is rated at 100W and per channel at 8Ω. The CA-2100 establishes a new entry-level Classé performance benchmark. Design features include balanced circuitry, overbuilt power supplies and oversized output stages to ensure the highest performance at every output level, with any loudspeaker.
model
(balanced inputs)
CA-2100
voltage gain 29.1dB

bandwidth

phase

155kHz (-3dB)
22kHz (-0.1dB)
< -10° (22kHz)
sensitivity 1.0Vrms
power/channel (continuous)
(120VAC line, 1kHz signal regulated to 1% THD + noise into resistive load, all channels driven)
load (resistive)  
100W
200W
THD + noise (unweighted, 10Hz - 500kHz bandwidth, 0.8Vrms/1kHz input)
load (resistive)  
none 0.002%
0.003%
0.005%
noise FFT noise floor peaks all below –95dBV
(with terminated inputs)
S/N ratio
(relative to 1kHz sine wave full level output into 8Ω)
105dB

height

depth
(excluding
connectors)

width
gross
weight
net
weight
4.75” (121 mm)
16.5” (419 mm)
17.5” (445 mm)
55 lbs (25 kg)
47 lbs (21 kg)
idle power consumption 104W
rated power consumption 260W


Classé reserve the right to adjust specifications without notice.
Compare specs  |  Print this spec  |  Close Window